Configuring the Queue Folder
This is used to make settings (dedicated settings such as specific media or request details) common to all print data added to the queue folder. In cases such as when the media used or printing specifications are the same, configuring the queue property settings will eliminate the need to configure the job settings for each print data.
Configure the settings of the queue folder in the Queue Properties window.
- The settings are applied to the print data to add to the set queue folder.
- This section explains how to configure the minimum settings required for printing (the size and type of the media to use in printing and the printing quality). Configure other settings according to the application.
MEMO If you are unfamiliar with VersaWorks operation or are not prepared to configure dedicated settings, you do not have to configure the Queue Properties settings. You can configure Impostazioni for each print data entry to print with the same settings as if you had configured the Queue Properties settings.
Procedura
-
Click
for the queue folder to be used.
The Queue Properties window appears. -
Enter the desired name in Nome della coda.
-
To set the size of the material, click
Layout and perform the following procedure.
- Manual setup
- Select the desired size from .
- To specify a size, select CustomROLL or CustomCUT, and then set Larghezza and A.
- Automatic setup
- Set up the media.
- Click
Obtain the Larghezza and A for the media that has been set up, and then configure the settings.
.
- Manual setup
-
Click
.Qualità
-
Select the type of the media to print on from
.
-
Use Qualità di stampa to select the printing quality.
-
Click OK.
The Save Settings confirmation screen appears.
-
Click OK.
The configured printing settings are saved, and you are returned to the main screen.
You can also configure many other settings for the queue folder.
For other settings, refer to the Impostazioni list in the VersaWorks 7 Master Guide.