Create a Cutting Line in an Ellipse or Rectangular Shape

An ellipse or a rectangle can be added as a cutting line.

Create elliptical or rectangular cut lines

Procedure
  1. Select the job to which to add a cutting line from the job list.
    IMPORTANT Cutting lines can only be added to PDF-format jobs.
  2. Use one of the methods below to open the Initialization Error window.
    • Right-click on the job to set, then click Edit Design - Initialization Error.
    • With the job to set selected, click VW7_JobMenu1 on the left side of the job tool area, and then click Initialization Error.
    The Initialization Error window appears.
  3. Click .
  4. Select the editing method Draw Cutting Line.
  5. Select Type of Cut from the following.
    : Cut Cuts solid lines over the cutting lines that were created.
    : Perforated Cut Cuts perforated (broken) lines over the cutting lines that were created.
  6. Select the shape of the cutting line.
    • : Ellipse
    • : Rectangle
  7. Click Draw.
    The cutting line for the selected shape is displayed. Solid lines are displayed in pink, and broken lines are displayed in gray.
  8. Select a cutting line and use the mouse to match the size and position to the print data.
  9. Click OK.
  10. In the confirmation window, click Yes.
    The Initialization Error window closes. It will be added to the job list as a new job.