Test Printing from VersaWorks

Printer operations can be used to print a test pattern for checking the nozzles. Correspondingly, the following pattern (approximately 260 × 182 mm [10.24 × 7.17 in.] *1) is printed from VersaWorks.

By printing the same data, it is possible to check for changes resulting from the different printer or environment, or changes of the print settings.

VW_TestPRint
Procedure
  1. Select the printer to test printing from.
    The background of the printer image changes to blue.
    VW7_Check the connection to the printer
  2. Click VW7-ICON_HamburgerMenu for the selected printer, and then select Test Print.
    The following message appears: The following job will be printed. Check whether the media loaded in the printer is large enough for the displayed page size.
  3. Select the queue folder from Add Job To.
  4. Click OK.
    The job for test printing is added to the job list, and then processing by the RIP and printing automatically start. Once the job has been printed, it is automatically deleted from the job list.
  5. When the message Job has been sent successfully. appears, click OK.