2. Install VersaWorks and register the printer.

Procedure
  1. In a printer window registered in Connect Hub, select the VersaWorks icon (VW7-ICON_ConnectHub-VW7) and click Install.
    The VersaWorks installation starts. When the [User Account Control] window appears, allow the operation.
  2. Install VersaWorks according to the instructions shown in the setup window.
    • When a window asking you to allow access to the network appears, allow the operation.
    • VersaWorks starts. The [Printer Registration] window is displayed, and VersaWorks will search for the connectable printers.
    MEMO
    You can also use the following methods to start VersaWorks.
    • Windows 11: Click Start - All or All apps, and then click VersaWorks 7 - VersaWorks 7.
    • Windows 10: Click Start, and then click VersaWorks 7 - VersaWorks 7.
    • Mac: Click Finder on the Dock, and then click Applications - VersaWorks 7.
  3. Set the printer to connect.
    If the search finds zero printers, you will have to register printers manually. If the search finds five or more printers, select the printer to register.
    • When the detected number of printers is one to four
      1. Check the list of detected printers and click OK to register all of them.

        If there is a printer you do not want to register, click Skip. Register printers manually, referring to the situation in which no printers are detected.

    • When five or more printers are detected
      1. Select the printer to register, and then click Register.

        The printer details window appears.

      2. Click OK.
      3. Repeat steps a. and b. to register printers.
    • When no printers are detected
      1. Click Manual Registration.
      2. Enter the IP Address.
      3. Click Verify.

        Download and install the file that defines the printer. When the installation is finished, the Model Name, the Ink Type, and similar information appear.

      4. If there are no problems, click Register.
    The VersaWorks home screen shows the registered printer(s).
  4. Click VW7-ICON_Customize to the right of the registered printer, and then click Create Virtual Printer.
    The [User Account Control] window appears, so allow the operation. Perform this operation on all the registered printers.
  5. If you have backed up the VersaWorks settings and job data, restore them.
    The newly installed computer is configured with, for example, the previously used VersaWorks settings.
This completes the VersaWorks installation.