Jump to main content
Setup and Licenses: Printers Cannot Be Registered
Setup and Licenses: Registering Multiple Printers
Setup and Licenses: Purchasing an Additional Function
Setup and Licenses: Additional Functions Cannot Be Used
Setup and Licenses: Unable to Add Jobs or Perform Processing by the RIP/Print (License Not Authenticated)
Setup and Licenses: Unable to Add Jobs or Perform Processing by the RIP/Print (Server Certificate Mismatch)
Job Settings and Job Management: Checking the Printer Status
Job Settings and Job Management: Saving Printing Settings
Job Settings and Job Management: Performing Only Processing by the RIP for a Job
Job Settings and Job Management: Setting a Margin Around the Print Data
Job Settings and Job Management: Printing a Single Job Multiple Times
Job Settings and Job Management: Preventing Print Data from Being Tiled
Job Settings and Job Management: Ink Consumption Not Displayed in the Job Log
Job Settings and Job Management: The Specified Value Is Replaced by Another Value
Job Settings and Job Management: Using the Same Overlap Settings as in the Previous Version
Job Settings and Job Management: Unable to Enter Values in the Settings and Queue Properties
Color Settings and Adjustment: Different Colors Printed for Queue A and Queue B
Color Settings and Adjustment: Printing with Smooth Gradations
Color Settings and Adjustment: Matching Different Printer Output Colors
Color Settings and Adjustment: Adjusting the Ink Limit
Color Settings and Adjustment: Making Black Darker
Color Settings and Adjustment: Image Colors Are Too Light or Too Dark
Color Settings and Adjustment: Unintended Colors Are Printed
Color Settings and Adjustment: Printed Colors Changing After a Reinstallation
Color Settings and Adjustment: Using the Same Preserve Primary Colors Settings as in the Previous Version
Color Settings and Adjustment: Bringing the Monitor Color Closer to the Printed Color
Printing Spot Colors and Special Colors: Adding White Plates to CMYK Data
Printing Spot Colors and Special Colors: Layering the Printing of Primer, White Ink, and CMYK Ink
Printing Spot Colors and Special Colors: Registering Swatches for Spot Colors
Printing Spot Colors and Special Colors: Spot Color Names Are Not Displayed Correctly
Printing Spot Colors and Special Colors: "Orange," "Green," and "Red" Are Not Recognized as Spot Color Names
Printing Spot Colors and Special Colors: Layers Are Not Displayed in Job Assistant
Cutting: Cutting All Lines
Cutting: Cutting the Job Data Boundaries
Cutting: Media Is Cut Twice
Cutting: Using a Cutting Machine for Cutting After Printing with the Printer
Cutting: Laminating and Cutting After Printing (Crop & Cut)
Cutting: Cutting Is Offset During the Cutting Step of Cutting with Crop Marks
Other: Changing the Amount of Memory to Assign
Other: Increasing the Printing Speed While Maintaining Quality
Other: Generated Barcodes and 2D Codes Cannot Be Read
Other: Narrow Lines Cannot Be Output
Other: Creating and Printing Print Data from Other Computers
Other: Specifying the Hot Folder and Outputting from the Design Software
Other: Performing Color Measurement of Charts
Other: Adding to VersaWorks Data Created in Roland DG Connect Designer
Other: Transitioning Data from VersaWorks 6 to VersaWorks 7
Other: Using Dimensor S Print Data in VersaWorks