Reducing the UV Lamp Illumination Intensity

This section explains how to reduce the illumination intensity of the printer's UV lamp. Depending on the model you are using, this setting may be disabled.
Procedure
  1. Click for the queue folder that you want to use.

    The Queue Properties window appears.
  2. Click .
  3. Select Change UV Lamp Illumination Intensity for UV Lamp Adjustment.
    If you change Media Type, Print Quality, Resolution, or Mode, you will have to set the illumination intensity again.
  4. Set the Illumination Intensity.
    IMPORTANT: Changing the illumination intensity can have an effect on printing quality (the ink may not cure or banding and unevenness may occur). Use caution when changing this setting.
  5. Click OK.
    IMPORTANT: You can also configure the same setting in the Job Settings window.