Step 2: Cut the Processed Media

Follow the procedure below to reload the removed media and cut it.
Procedure
  1. Apply the lamination or other desired post-processing, and then reload the media on the printer.
    If your printer requires the crop mark detection process, complete it now.
  2. Double-click the printed job.
    The Job Settings window appears.
    IMPORTANT: If the Center on the Media check box is selected, clear it. If the Center on the Media check box is selected, the printing and cutting positions may be misaligned.
  3. Click .
  4. Check that the Crop Marks (Print&&Cut Alignment) check box is selected.
  5. Click .
  6. From the Operation Mode list, select Cut Only.
  7. If necessary, perform the operations shown below.
    • To cut along all lines (paths) drawn in vector format in the data
      • Select the Cut All Paths check box. All paths will be recognized as cutting lines and will be cut regardless of whether they are drawn with the spot color (CutContour).
    • To cut the border of the job regardless of whether a cutting line is present
      • Select the Cut Image Boundaries check box.
    • To return the media to the origin (the position before cutting) after cutting
      • Select the Return to Origin After Cut check box.
    • To configure printer cutting conditions such as the blade force
      • Select the Cutting Conditions Settings check box to enable the settings.
  8. Click OK.
  9. Click .
    The printer detects the crop marks to adjust the position of the media, and then performs cutting.