Performing Only UV Lamp Illumination

You can configure the settings so that only the UV illumination matching that performed during printing is performed again after printing. Depending on the model you are using, this setting may be disabled.
Procedure
  1. In the job list, double-click the job.
    The Job Settings window appears.
  2. Click .
  3. Select UV Illumination Only for Operation Mode under UV Lamp Control.
  4. Use Scan Speed to set the print head movement speed.
  5. Click OK.
    The job icon in the job list changes to .
  6. Click .
    Only UV lamp illumination is performed.