Test Printing from VersaWorks

Printer operations can be used to print a test pattern for checking the nozzles. Correspondingly, the following pattern (approximately 260 × 182 mm [10.24 × 7.17 in.]*1) is printed from VersaWorks.

Printing the same data makes it possible to check for differences between printers, changes attributable to the environment, changes to the printing settings, and similar items.

VW_TestPRint
Procedure
  1. Selecting the printer to test printing from.
  2. Click Printer - Test Print.
    The following message appears: The following job will be printed. Do you want to continue? Check whether the media loaded in the printer is large enough for the displayed page size.
  3. Select the queue folder from Add Job To.
  4. Click OK.
    The job for test printing is added to the job list, and then processing by the RIP and printing automatically start. Once the job has been printed, it is automatically deleted from the job list.
  5. When the message Job has been sent successfully. appears, click OK.