Test Printing from VersaWorks
Printer operations can be used to print a test pattern for checking the nozzles. Correspondingly, the following pattern (approximately 260 × 182 mm [10.24 × 7.17 in.]*1) is printed from VersaWorks.
By printing the same data, it is possible to check for changes resulting from the different printer or environment, or changes of the print settings.

Procedure
- Selecting the printer to test printing from.
-
Click
on the menu bar.The following message appears: The following job will be printed. Do you want to continue? Check whether the media loaded in the printer is large enough for the displayed page size.
- Select the queue folder from Add Job To.
-
Click OK.
The job for test printing is added to the job list, and then processing by the RIP and printing automatically start. Once the job has been printed, it is automatically deleted from the job list.
- When the message Job has been sent successfully. appears, click OK.