7. Milling area cleaning

Use this window when you clean the machine. You can use it to perform operations such as moving the rotary axis unit and the spindle. Hovering the mouse pointer over the menu items switches the VPanel illustration, allowing you to check the cleaning location.

* The following image is an example. The displayed menu will vary depending on the model used.


VPanel_for_DWX_Cleaning

Front
Moves the rotary axis unit to the front. Use this function when cleaning the rotary axis unit.
Rear
Moves the rotary axis unit to the back. Use this function when cleaning the back of the milling area.
Reverse side
Turns the clamp over. Use this function when cleaning the back side of the clamp.
Spindle
Moves the spindle unit to a location where it is visible. Use this function when cleaning around the spindle unit.
Disc changer
Lowers the disc changer. Use this function when cleaning the adapter stocker or barcode sensor.
The text on the button may be Barcode sensor depending on the model used.
Dust collector

Turns the dust collector ON/OFF.
(For dust collectors with a linking function and connected to the expansion port with a linking cable.)

For details on the dust collector, refer to the Setup Guide of the model you are using.

DWX-52DC Setup GuideDWX-52DCi Setup Guide