Step 1: Performing a Nozzle Drop-out Test

Before you carry out actual printing, perform a printing test to ensure no dot drop-out or dot displacement occurs. If dot drop-out or dot displacement occurs, perform cleaning of the print heads (normal cleaning).
MEMO When performing printing tests successively, you can select Feed (vertical printing) or Scan (horizontal printing) as the printing position for the second and later tests in comparison to the first test.Performing Printing Tests Arranged Horizontally
Procedure
  1. Set up the media.
  2. Tap VG3_Panel_Icon_CLEANING Nozzle Drop-out Test on the home screen.
  3. Tap Execute next to Printing Test.
    Printing of the test pattern starts.
  4. Check whether there is dot drop-out or dot displacement in the test pattern.
    Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.


  5. If you have opened the front cover, close it.
    If no dot drop-out or dot displacement occurs, preparations for output are finished.