Turning on Bluetooth Communication

This machine supports the operation application, which is an application for mobile terminals. When using the operation application, set this machine's Bluetooth communication to ENABLE. However, when you are operating this machine from its operation panel, you cannot perform operations from the operation application.
  1. Press MENU.
  2. Press ▼ several times to display the screen shown below.


  3. Press ▶ once, and then press ▼ several times to display the screen shown below.


  4. Press ▶ twice to display the screen shown below.


  5. Press ▲ or ▼ to select ENABLE.


  6. Press ENTER to confirm your entry.
  7. Press ◀ to display the screen shown below.
    The current state is displayed on the screen.


    ENABLE Bluetooth communication is on, and the printer is waiting for a connection to be established. If you cannot operate this machine from the dedicated mobile operation application (hereinafter referred to as the "operation application") that you are using, there is a problem with the connection environment.

    Printer Cannot Be Operated from the Dedicated Application
    ENABLE*

    Bluetooth communication is on, and the printer is connected to the operation application.

    However, when this screen is displayed, you cannot perform operations from the operation application.

    Performing Operations from the Dedicated Mobile Operation Application
    DISABLE Bluetooth communication is off.
    ERROR An error has occurred in Bluetooth communication. Purchase them from your authorized Roland DG Corporation dealer.
  8. Press MENU to go back to the original screen.
    MEMO: