Setting the Activation Interval for Sleep Mode (Power-saving Feature)

This setting is used to set how long it should take until the machine goes into sleep mode (the state in which the power-saving feature is working) when no output data is received and no operations are performed for a continued length of time.
  1. Press MENU.
  2. Press ▼ several times to display the screen shown below.


  3. Press ▶ once, and then press ▼ several times to display the screen shown below.


  4. Press ▶ twice to display the screen shown below.


  5. Press ▲ or ▼ to set the time.


  6. Press ENTER to confirm your entry.
  7. Press MENU to go back to the original screen.
    MEMO:
    • Default setting: 30 min