3 Adjust the print head height.

  1. Press ◀ to select "CHANGE."


  2. Press ENTER to confirm your entry.
    You can select NEXT and press ENTER to skip the current menu and proceed to the next menu.
  3. When the following screen is displayed, open the front cover.


  4. Move the height-adjustment lever to adjust the head height.
    When you change the position of the height-adjustment lever, the display screen changes and the buzzer sounds at the same time.


    Position Display screen


    		HIGH




    		MIDDLE




    		LOW


    MEMO:

    • Normally move the height-adjustment lever to "LOW." For media that is wrinkled or comes loose from the platen, move the height-adjustment lever to "MEDIUM" or "HIGH."

    • The printing quality degrades as the distance between the media and the print heads increases. Do not move the height-adjustment lever to "MEDIUM" or "HIGH" needlessly.

  5. Close the front cover.