2. Print only the crop marks.

Procedure
  1. Press [MENU].
  2. Press [▲] to display the screen shown below.


  3. Press [▶], then [▼] to display the screen shown below.


  4. Press [▶] twice to display the screen shown below.


  5. Press [ENTER].
    Printing of the test pattern starts.

    Only one crop mark is printed.

  6. When printing is finished, press [MENU] to go back to the original screen.
  7. Remove any media.
    If the media needs to be separated, refer to the following page.

    Separating the Media

  8. Complete operations before cutting output for normal cutting with crop marks, such as laminating.