2. Limit the print heads used for printing.

Procedure
  1. Start VersaWorks.
  2. Click [Printer] - [Printer Settings].
    The [Printer Settings] dialog box appears.
  3. From the [Printer List], select the printer whose print heads will be limited.
  4. Click [Advanced].
    The [Advanced] dialog box appears.
  5. Select the nozzle group to use in printing from the printing-test results.
    The selectable nozzle group numbers vary depending on the model being used and on the firmware version. Select the appropriate group number to match the printing-test results.
    MEMO:

    If the firmware version is 1.2 or later, update VersaWorks to version 6.3.1 or later. For information on updating the software, contact your authorized Roland DG Corporation dealer or visit our website (http://www.rolanddg.com/).



  6. Click [OK].
    Close the [Advanced] dialog box.
  7. Click [OK].
    Close the [Printer Settings] dialog box.

    The icon is displayed on top of the image of the printer whose setting has been changed.