Step 2: Circulating the Ink (Only When Using White Ink)

* This operation is not required for the ink types shown below. Proceed to Step 3: Discharging the Wiper Tray Cleaning Liquid.
  • Four colors: CMYK
  • Eight colors: CMYKLcLmLkOr
  • Seven colors: CMYKLkOrGr
Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the screen shown below.


  3. Press [▶] once, and then press [▼] several times to display the screen shown below.


  4. Press [▶] once, and then press [▼] several times to display the screen shown below.


  5. Press [ENTER].
    The screen shown below appears, and then the ink circulation starts. The (approximate) remaining time for the procedure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 seconds")


    Depending on the timing with which the ink circulation is started, the following screen may be displayed and cleaning may start. When cleaning is complete, the ink circulation will start, so wait for the ink circulation to complete. (The display shown below is an example. "01:45" = "1 minute and 45 seconds")


    When finished, the screen shown below appears again.