2. Limit the print heads used for printing.

Procedure
  1. Start VersaWorks.
  2. Click Printer - Printer Settings.
    The Printer Settings dialog box appears.
  3. From the Printer List, select the printer whose print heads will be limited.
  4. Click Advanced.
    The Advanced dialog box appears.
  5. Select the nozzle group to use in printing from the printing-test results.
    The nozzle group numbers that can be selected vary depending on the model being used and the firmware version. Select the appropriate group number (or all the group numbers) to match the results of the printing test.
    MEMO:

    If the firmware version is 1.2 or later, update VersaWorks to version 6.3.1 or later. For information on updating the software, contact your authorized Roland DG Corporation dealer or visit our website (http://www.rolanddg.com/).



  6. Click OK.
    Close the Advanced dialog box.
  7. Click OK.
    Close the Printer Settings dialog box.

    The icon is displayed on top of the image of the printer whose setting has been changed.