3. Adjust the print head height.

Procedure
  1. Press [◀] to select "CHANGE".


  2. Press [ENTER] to confirm your entry.
    You can select "NEXT" and press [ENTER] to skip the current menu and proceed to the next menu.
  3. When the following screen is displayed, open the front cover.


  4. Move the height-adjustment lever to adjust the head height.
    When you change the position of the height-adjustment lever, the display screen changes and the buzzer sounds at the same time.


      Position Display screen
    "HIGH"


    "MID"


    "LOW"


    MEMO:

    • Normally move the height-adjustment lever to "LOW". For media that is wrinkled or comes loose from the platen during printing, move the height-adjustment lever to "MID" or "HIGH".

    • The printing quality degrades as the distance between the media and the print heads increases. Do not move the height-adjustment lever to "MID" or "HIGH" needlessly.

  5. Close the front cover.