Maximum Printing Area and Margins

The printing area along the horizontal plane of the loaded media (the direction in which the carriages move) is determined by the margin setting.




Origin of printing coordinates


Printing area


Media clamp
A 75 mm (3 in.)
B
"SIDE MARGIN" setting value
  • "5 mm"
  • "10 mm"(Default settings)
  • "25 mm"

Set the margins.
C Width clamped by each media clamp: 7 mm (0.28 in.)
B + C

Actual margin value1
D Max. 200,000 mm (7,874 in.)
E

Max. 1,615 mm (63.6 in.)

* When printing with the media clamps removed
F 105 mm (4.13 in.)
1 When the media is set up without attaching the media clamps, B (the "SIDE MARGIN" setting value) alone is used for the margin value without considering C (the width clamped by each media clamp).