Setting the Output Heater Temperature

Depending on the usage environment, the temperature of the dryer may become higher than the set temperature, but this does not represent a problem.

Procedure
  1. Set up the media.
  2. Tap the following location on the home screen.

    VG3_Panel_TOP_Heater
    The Heater Temperature screen appears.
  3. Tap VG3_Panel_Icon_Toggle_OFF to turn Front Heater on AP-640_Panel_Icon_Toggle_ON.

    VG3_Panel_HeaterPower_on
  4. Tap AP-640_Panel_Icon_MINUS or AP-640_Panel_Icon_PLUS to set the temperature of the Front Heater.

    Temperature settings are not possible when Front Heater is set to VG3_Panel_Icon_Toggle_OFF.

    A temperature that is too high may degrade the media or cause it to wrinkle.
  5. Tap Save to confirm your entry.
  6. Tap AP-640_Panel_Icon_HOME to go back to the original screen.
    MEMO

    • Default setting: Off