Step 6: Removing the Retainers

IMPORTANT
  • Make sure to remove all the retainers. Any that remain may cause faulty operation or breakdown when the power is switched on.
  • Store the retainers because they are needed again when transporting the machine.
Procedure
  1. Open the front, left, and right covers.
  2. Remove all the retainers.
    Figure 1. Front

    LG_Fixing

    Figure 2. Rear

    Rear_fixing

  3. Install retainers C and E, which you have removed, at the positions indicated in the figure for storage.
    Use the bolt removed in step 2.

    Retainer C


    LG_Fixing2

    Retainer E

    Rotate retainer E by 180° and install it at the position that hides the gear.


    FixingE

  4. Close the front, left, and right covers.