Setting a Fixed IP Address

If the automatic assignment of the IP address from a DHCP server fails or if you want to set an IP address that does not change, enter a fixed IP address.
IMPORTANT

In an environment where the printer is connected to multiple network devices and the Internet, inappropriate settings will have a large effect on the entire network. For detailed information about the settings, consult your network administrator.

Procedure
  1. Tap AP-640_Panel_Icon_MENU.
  2. Tap System Information - Network.
  3. Tap Obtain IP Address Automatically to set it to Disable.
  4. Tap AP-640_Panel_Icon_EDIT to the right of IP Address.
    The numeric value input screen appears.

    AP-640_Panel_SystemInfo_Machine_IPAddress

  5. Enter the IP address.
    For the IP address, contact your network administrator.
  6. Tap OK.
  7. Tap AP-640_Panel_Icon_EDIT to the right of Subnet Mask.
    The numeric value input screen appears.

    AP-640_Panel_SystemInfo_Machine_SubnetMask

  8. Enter the subnet mask.
  9. Tap OK.
  10. Tap AP-640_Panel_Icon_EDIT to the right of Default Gateway.
    The numeric value input screen appears.

    AP-640_Panel_SystemInfo_Machine_DefaultGateway

  11. Enter the default gateway.
  12. Tap OK.
  13. Tap Save.
  14. Tap AP-640_Panel_Icon_HOME.
    The home screen appears.
This completes the setting of a fixed IP address. Go back to the home screen. Then, proceed to 4. Downloading and Installing Software.