Specifications
| Printing method | Piezo ink-jet method | |||
| Media | Width | 335 to 1,625 mm (13.2 to 64 in.) | ||
| Thickness |
Max. 1.0 mm (39.3 mil) with liner, for printing Max. 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting |
|||
| Roll outer diameter | Max. 250 mm (9.8 in.) | |||
| Roll weight | Max. 45 kg (99 lb.) | |||
| Core diameter | 76.2 mm (3 in.) or 50.8 mm (2 in.) | |||
| Printing/cutting width*1 | Max. 1,600 mm (62.9 in.) | |||
| Ink | Type | UV-Ink (D-UAP) 750ml pouch | ||
| Colors |
Six colors（Cyan, Magenta, Yellow, Black, Gloss, and White） Four colors（Cyan, Magenta, Yellow, and Black） |
|||
| Ink-curing unit | Built-in UV-LED lamps | |||
| Printing resolution (dots per inch) | Max. 1,200 dpi | |||
| Cutting speed | 10 to 300 mm/s (0.39 to 11.8 in./s) | |||
| Blade force*2 | 30 to 500 gf | |||
| Blade | Type | Roland CAMM-1 series blade | ||
| Offset | 0.000 to 1.500 mm (0.0 to 59 mil) | |||
| Software resolution (when cutting) | 0.025 mm/step (0.98 mil/step) | |||
| Media heating system*3 |
Front heater set temperature : 30 to 55 ℃ (86 to 131 °F) |
|||
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) | |||
| Power-saving function | Automatic sleep feature | |||
| Power requirements | 100-120/220-240 Va.c. 50/60 Hz 6.5/3.2 A | |||
| Power consumption | During operation | Approx. 800 W | ||
| Sleep mode | Approx. 85 W | |||
| Acoustic noise level | During operation | 63 dB(A) or less | ||
| During standby | 58 dB(A) or less | |||
| Dimensions (Width x Depth x Height) |
2,902 mm × 748 mm × 1,412 mm (114.3 in. x 29.5 in. x 55.6 in.) |
|||
| Weight | 209 kg (461 lb.) | |||
| Environment | During operation*4 | Temperature : 20 to 32 ℃ (68 to 89.6 °F) , Humidity：35 to 80 % RH（no condensasion） | ||
| Not operating | Temperature : 5 to 40 ℃ (41 to 104 °F) , Humidity：20 to 80 % RH（no condensasion） | |||
| Included items | Dedicated stand, power cord, media take-up unit, media holders, separating knife, re-placement blade, cleaning liquid, drain bottle, User's Manual, software (VersaWorks,Roland DG Connect), etc. | |||
*1 The length of printing or cutting is subject to the limitations of the program.
*2
- 500 gf is the maximum instantaneous blade force.
- The blade force must be adjusted according to details such as the media thickness.
*3
- Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
- Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
