Disabling Media Skewing Correction Support

You can manually set the media suction force by setting the media skewing correction support to "DISABLE". If the media has not been set up, the suction force is 20%. This value switches from 50% to 100% to 20% each time [PAUSE] is pressed.
Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the following screen.


  3. Press [▶] to display the following screen.

    MENU_SUBMENU_SKEWING_CORR
  4. Press [▶] to display the following screen.

    SKEWING_CORR_ENABLE_ENABLE
  5. Press [▲] or [▼] to select "DISABLE".
  6. Press [ENTER] to confirm your entry.
  7. Press [MENU] to return to the original screen.
    MEMO
    • Default setting: "ENABLE"