Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed

Set the machine to display the amount of media remaining every time the media is changed.

Setting this menu item to "ENABLE" can keep you from forgetting to redo the setting when you change the media. However, be sure to also set the "EDGE DETECTION" menu item to "ENABLE".Disabling Detection of the Edges of the Media

When "EDGE DETECTION" is set to "DISABLE", "SET LENGTH" is not displayed automatically.

Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the following screen.


  3. Press [▶], then [▲] to display the screen shown below.


  4. Press [▶] to display the following screen.


  5. Press [▲] or [▼] to select "ENABLE".


  6. Press [ENTER] to confirm your entry.
    If you select "ENABLE", you must set the "EDGE DETECTION" menu item to "ENABLE".
  7. Press [MENU] to return to the original screen.
    MEMO

    Default setting: "DISABLE"