3. Insert the Ink Cartridge for Each Color

Procedure
  1. Before inserting ink cartridges, shake each of them 50 times (about 20 seconds).
    Shake_cartridge
    The precipitation of the ingredients in the ink disables printing in normal color. So that the ink mixes well, shake the ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of the ink cartridge.
  2. When the following screen is displayed, insert an ink cartridge for each color.
    MENU_SET_CARTRIDGE_123456
    Insert the ink cartridge (MG)
    When ink cartridges are inserted in all the slots, the following screen appears.
    LCD_FILLING_INK
  3. When the screen shown below appears, remove the drain bottle and discard the discharged fluid.
    MENU_EMPTY_D-BOTTLE
    IMPORTANT When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to prevent this fluid from soiling your hands.
  4. Quickly attach the emptied drain bottle to the machine once more.
  5. Make sure the drain bottle is installed, and then press [ENTER].
    When the following screen is displayed, filling with ink is finished.
    MENU_SETUP_SHEET
  6. Close the front cover.