Normal Cleaning Method

MEMO If the media has already been set up, the After cleaning, perform a printing test. menu appears on the Normal Cleaning screen. When this setting is turned on, a printing test is performed after cleaning.
Procedure
  1. Tap AP-640_Panel_Icon_MENU.
  2. Tap Cleaning - Normal Cleaning.
  3. Tap Execute.
    Cleaning will start. The status is displayed as Normal cleaning in progress. at the top of the operation panel.

    On completion, you will return to the original screen.

  4. Tap AP-640_Panel_Icon_BACK.
  5. Perform a printing test again.
  6. Check to make sure the dot drop-out or dot displacement has been corrected.
    If the problem persists, try performing normal cleaning again. If the printer has been used for a long period, dot drop-outs may not be fixed even after performing normal cleaning two or three times. If this is the case, clean using a different method.