Specifications
| SG3-540 | SG3-300 | ||
|---|---|---|---|
| Printing method | Piezo ink-jet method | ||
| Media | Width | 295 to 1.371 mm (11.7 to 54 in.) | 182 to 762 mm (7.2 to 30 in.) |
| Thickness | Max. 1.0 mm (39.3 mil) with liner, for printing Max. 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting | ||
| Roll outer diameter | Max. 250 mm (9.8 in.) | ||
| Roll weight | Max. 35 kg (77 lb.) | Max. 30 kg (66 lb.) | |
| Core diameter | 76.2 mm (3 in.) or 50.8 mm (2 in.) | ||
| Printing/cutting width*1 | Max. 1,346 mm (52.9 in.) | Max. 736 mm (28.9 in.) | |
| Ink | Type | TrueVIS INK 500 ml pouch | |
| Color | Four colors (cyan, magenta, yellow, and black) | ||
| Printing resolution (dots per inch) | Max. 1,200 dpi | ||
| Cutting speed | 10 to 300 mm/s (0.39 to 11.8 in./s) | ||
| Blade force*2 | 30 to 500 gf | ||
| Blade | Type | Roland CAMM-1 series blade | |
| Offset | 0.000 to 1.500 mm (0.0 to 59mil) | ||
| Software resolution (when cutting) | 0.025 mm/step (0.98 mil/step) | ||
| Media heating system*3 | Print heater set temperature: 30 to 45°C (86 to 113°F) Dryer set temperature: 30 to 55°C (86 to 131°F) | ||
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) | ||
| Power-saving function | Automatic sleep feature | ||
| Rated input | 100-120/220-240 Va.c. 50/60 Hz 8.0/4.1 A | 100-120/220-240 Va.c. 50/60 Hz 5.4/2.7 A | |
| Power consumption | During operation | Approx. 1,090 W | Approx. 710 W |
| Sleep mode | Approx. 50 W | ||
| Acoustic noise level | During operation | 63 dB (A) or less | |
| During standby | 53 dB (A) or less | ||
| Dimensions (width × depth × height) | 2,632 × 748 × 1,320 mm (103.7 × 29.5 × 52.0 in.) | 2,022 × 748 × 1,320 mm (79.7 × 29.5 × 52.0 in.) | |
| Weight | 183 kg (404 lb.) | 150 kg (331 lb.) | |
| Environment | During operation*4 | Temperature: 20 to 32°C (41 to 104°F), humidity: 35 to 80%RH (no condensation) | |
| Not operating | Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation) | ||
| Included items | Dedicated stand, power cord, media take-up unit, media holders, separating knife, replacement blade, cleaning liquid, drain bottle, User's Manual, software (VersaWorks, Roland DG Connect), etc. | ||
*1 The length of printing or cutting is subject to the limitations of the program.
*2
- 500 gf is the maximum instantaneous blade force.
- The blade force must be adjusted according to details such as the media thickness.
*3
- Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
- Depending on the ambient temperature and the media width, the set temperature may not be reached.
