Check that you can perform communication through the LAN (Local Area Network).
The LAN is enabled if the status LED () on the LAN connector located on the side of the printer is lit in green.
Activity LED
This flashes yellow while data is being received from the network.
Status LED
This indicates the status of the communication function. When it lights in green, communication is possible.
Preventing Sedimentation in Inks
The precipitation of the ingredients in the ink disables printing in normal color. To mix the ingredients in the ink well, remove the pouch tray, shake it 50 times (for approximately 20 seconds), and then reinsert it.
Shake the pouch trays:
Once per week.
After inserting a new ink pouch.
MEMO:To prevent ink precipitation, you can make the machine periodically display a message prompting you to mix the ink.Thoroughly Mixing the Ink Periodically
IMPORTANT:
Do not remove the ink pouches. Shake the entire pouch tray. Removing the ink pouches may lead to the ink leaking.
Before shaking, wipe off any ink from around the mouth of the ink pouch. If you do not wipe off the ink, it may splatter when you shake the pouch tray.
When you have finished mixing the ink, reinsert the pouch tray immediately. Taking time to reattach the ink cartridge will adversely affect the ink path.
