Types and Timing of Maintenance

To use this machine under its optimal conditions, it is important to perform the appropriate maintenance at the appropriate times.

Regular Maintenance

These are the maintenance items that are required on a daily or periodic basis.

Timing	Item	Refer to
Before work	Checking and cleaning the print heads	Performing a Nozzle Drop-out Test
		Performing Normal Cleaning
After work	Cleaning the machine	Cleaning the Machine
When a message appears	Manual Cleaning	Manual Cleaning

Advanced Maintenance

This is maintenance that is performed when problems occur. Some of this maintenance also consumes a large amount of ink, so thoroughly read the explanation, and then perform the operation at the appropriate point in time.

Timing	Item	Refer to
When dot drop-out or dot displacement occurs	Each type of cleaning through ink renewal	Action Taken When Dot Drop-out or Dot Displacement Occur

Replacing Consumable Parts

These items are for replacement of consumable parts. Thoroughly read the explanation, and then perform the operation at the appropriate point in time.

Timing	Item	Refer to
When an ink cartridge is replaced	Ink cartridge mixing	Maintenance of Ink Cartridges
When a message appears	Drain pack	Replacing the Drain Pack
	Wiper	Replacing the Wiper
	Felt wiper	Replacing the Felt Wiper
	Cap top	Replacing the Cap Top
Every year or when an odor is noticed in the vicinity of the machine	Deodorizer filter	Replacing the Deodorizer Filter