Moving the Machine
Preparations prior to moving
Perform the following work before moving in order to minimize the damage to the machine that can occur during moving. If the preparations prior to moving are not performed, ink may leak and damage the internal devices, or the print heads may be damaged.
-
Once the preparations for moving the machine are complete, move the machine promptly and turn on the machine as soon as possible after the machine is relocated. If you leave the machine alone without turning it on, the precipitated ink will coagulate and result in problems such as the clogging of the print heads.
-
When moving the machine, keep it at a temperature from 5 to 40°C (41 to 104°F) and at a humidity from 20 to 80%RH (with no condensation). Failure to do so may result in a breakdown.
-
Handle the machine with care when moving it, keeping it level (not tilted at an angle) and preventing it from striking other objects.
- Circulate the ink.
- Discard the discharged fluid.
- Install retainers on moving parts so they do not move during moving.
Reinstalling after moving
Once the preparations for moving are complete, move and reinstall the machine with as little delay as possible.
- Once the preparations for moving are complete, move the machine without delay.
- Place the machine in a location that is suitable as an installation location.
- Removing the Retainers