Changing the Holding Pressure

Change the degree of force when the object is pinched by the rotary device.

Procedure
  1. Load the object.
    Select the media you want to change the Holding Pressure for, and load the object in the rotary device.
  2. Tap Panel_Icon_Menu.
  3. Tap Media Settings - Holding Pressure Settings.
  4. Tap Standard or Weak.
    MEMO

    Default setting: Standard

  5. Tap Save.
  6. Close the front cover.
    MEMO

    Be sure to hold the handle of the front cover and keep holding it until the cover is completely opened or closed.

    If you do not open and close the front cover gently, it may break or you may be injured.

  7. Tap Panel_Icon_Back.
    You are returned to the Media Settings screen.