Specifications
| PB-600 | PB-400 | ||
|---|---|---|---|
| Build technology | Binder jetting | ||
| Printing speed | 35 sec./layer | 45 sec./layer | |
| Printing size (width × depth × height) | Max. 595 mm × 600 mm × 250 mm (23.42 in. × 23.62 in. × 9.84 in.) | Max. 390 mm × 290 mm × 200 mm (15.35 in. × 11.41 in. × 7.87 in.) | |
| Fixture material | Dedicated fixture material (ceramic powder) | ||
| Binder | Dedicated (water-based) binder fluid | ||
| Printing resolution | 600 × 600 dpi | ||
| Layer pitch | 0.1 mm (3.94 mil) | ||
| Distance accuracy (including correction value) | Error of less than ±0.3% of distance traveled, or 0.5 mm (19.68 mil), whichever is greater | ||
| Power requirements | 230 VAC, single phase, 16 A | ||
| Dimensions (width × depth × height) | 3,150 mm × 1,344 mm × 1,900 mm (124.02 in. × 52.91 in. × 74.8 in.; excluding PC arm stand) | 1,709 mm × 970 mm × 1,382 mm (67.28 in. × 38.19 in. × 54.41 in.; excluding PC arm stand) | |
| Weight | 1,200 kg (2,645.55 lb.) | 430 kg (947.99 lb.) | |
| Environment | During operation |
Temperature: 20°C to 24°C (68°F to 75.2°F), humidity: 50%RH or less (no condensation) (A temperature of 20°C [68°F] and little fluctuation in temperature are recommended.) |
|
| During standby*1 |
Temperature: 5 to 40°C (41 to 104°F), humidity: 20%RH to 80%RH or less (no condensation) |
||
*1 If the printer is loaded with fixture material, the conditions during operation will be applied.