Print Parameters (FlexiDESIGNER)
Selecting different options for the Media Type and Mode print parameters allows for different types of printing. These different types are listed below.
| Media Type | Quality | Mode | Description |
|---|---|---|---|
| Rotary *1 *2 |
Standard *3 High Speed |
CMYK White->CMYK CMYK->White White |
The rotary axis unit is used to print on a cylindrical object. |
| Rotary with Primer*1*4 |
Standard*3 High Speed |
Primer->CMYK Primer->White->CMYK Primer->CMYK->White Primer->White |
Use this parameter when printing primer under the Rotary media type. |
| Rotary with Special Effects*2 |
Standard*3 High Speed |
CMYK -> MatteVarnish MatteVarnish -> CMYK |
Use this parameter when printing gloss on the Rotary media type. |
*1 Ink type: Five colors (cyan, magenta, yellow, black, and white) and primer
*2 Ink type: Five colors (cyan, magenta, yellow, black, and white) and gloss
*3 Default setting
*4 It is difficult for ink to adhere to metal, PET, acrylic, glass, and similar substances. Using a primer improves ink adherence. However, it is difficult to improve this adherence if the substance has been coated or has otherwise undergone surface treatment such as glass coating, waterproofing, or stain proofing. Be sure to perform test printing with the actual object to check how well the ink adheres to it.