Cleaning the Machine
Wipe away any ink or grime on the nozzle drop-out test stage, rollers, shafts, tail stopper, or guide areas as part of the daily cleaning procedure. Clean by wiping with a cloth moistened with neutral detergent diluted with water then wrung dry.
WARNING
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause a fire.
Always unplug the power cord when attaching or removing parts and optional parts and when performing cleaning or maintenance that does not require the machine to be connected to a power source.
Attempting such operations while the machine is connected to a power source may result in injury or electrical shock.
IMPORTANT
- This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
- Never attempt to oil or lubricate the machine.
- Frequently clean the inside of the rotary axis unit using a vacuum cleaner or by wiping with a cloth moistened with water then wrung dry. If dust and dirt accumulate, they are likely to affix to printed materials.
- If ink or grime has adhered to the roller, the object may not rotate smoothly, resulting in printing misalignment.
