Switching the Power On and Off

Switching On the Power

Procedure
  1. Open the cover.

    Hold the middle area of the cover when opening it.

    MPX-90S_OpenCover
  2. Rotate the knob () through approximately one turn to loosen the head's stopper ().
    MPX-90S_LoosenStopper
  3. Close the cover.
  4. Press the Power/Movement button.

    The head moves to the back left corner, and the lamp of the Power/Movement button blinks before turning on. This operation is called initialization.

    MPX-90S_PowerONOFF
    MEMO If the power lamp continues blinking after switching on the power, an initialization error has occurred due to the head's stopper being too tight. Loosen the stopper, and then press the Power/Movement button again.

Switching Off the Power

Procedure
Hold down the Power/Movement button for one second or longer.

The lamp of the Power/Movement button and the machine turn off.

MPX-90S_PowerONOFF