Removing and Storing the Retainers
Retainers are attached to protect the machine from vibration during shipment. Remove the retainers after emplacement.
WARNING
This work must be performed before connecting the power cord.
The power turning on inadvertently during these operations may result in pinched hands or other injury.
IMPORTANT
- Remove all the retainers. Any retainers that remain may cause faulty operation or breakdown when the power is switched on.
- The retainers and package are required when moving the machine to a different location. Attach the retainers to the back of this machine to store them carefully so they do not get misplaced.
Removing the Retainers
The machine is secured at three points (with 5 screws). Remove all the screws and retainers with the included hexagonal wrench.
Storing the Retainers
Store the retainers by attaching them to the positions in the following figure.
