Performing Normal Cleaning

MEMO If the media has already been set up, the After cleaning, perform a printing test. menu appears on the Normal Cleaning screen. When this setting is turned on, a printing test is performed after cleaning.
Procedure
  1. Set up the media.
  2. Tap Panel_Icon_Menu.
  3. Tap Cleaning - Normal Cleaning.
  4. Tap Execute.

    Cleaning will start. The details of the operation in progress and the (approximate) remaining time of that work are displayed in the status bar at the top of the screen. When the work is finished, the status bar returns to its original display.

  5. Tap Panel_Icon_Back.
  6. Tap Printing Test.
  7. Tap Nozzle Drop-out Test - Execute.
  8. Check to make sure the dot drop-out or dot displacement has been corrected.
    If the problem persists, try performing normal cleaning again. If the printer has been used for a long period, dot drop-outs may not be fixed even after performing normal cleaning. If this is the case, clean using a different method.
  9. Tap Panel_Icon_Home.
    You are returned to the home screen.