Step 3: Adjusting Cutting

For high-quality cutting, we recommend carrying out a cutting test to check the cutting quality for the media before you perform actual cutting. Adjust the blade force depending on the cutting quality.
Procedure
  1. Close the front cover.
  2. Tap VG3_Panel_Icon_CUTADJ Blade Adjustment on the home screen.
  3. Tap Execute next to Cutting Test.
    The test pattern is cut.
  4. Peel off the cut shapes and change the Blade Adjustment settings according to the cutting quality.

    Check that the two shapes are peeled off separately, a blade trace (red line) remains on the backing paper, and the backing paper is not cut.



    • Two shapes are peeled off separately

      You do not need to perform the setting because the blade force is appropriate.

    • Two shapes are peeled off together

      Increase the blade force.

    • Backing paper is also cut

      Decrease the blade force.

  5. Tap Save.
    The changed settings are saved.
  6. Tap Execute next to Cutting Test.
    The test pattern is cut.
  7. Check whether the correction was successful.
In the Blade Adjustment menu, you can also make settings for other cutting conditions in addition to the blade force.