Cleaning Liquid Replacement Method

WARNING
Never store ink, cleaning liquid, or discharged fluid in any of the following locations.
  • Any location exposed to open flame
  • Any location where high temperature may occur
  • Near bleach or any other such oxidizing agent or explosive material
  • Any location within the reach of children

Fire may be a danger. Accidental ingestion by children may pose a health hazard.

IMPORTANT
Precautions regarding cleaning liquid pouch replacement
  • Never insert or remove the cleaning cartridge with undue force. Cleaning liquid may leak.
  • If the cover of the cleaning cartridge does not lock securely, this cartridge needs to be replaced.

    For information about purchasing cleaning cartridges, contact your authorized dealer or visit our website (https://www.rolanddg.com/).

Procedure
  1. Pull out the cleaning cartridge from the machine.

    RemoveCleaningLiqu

  2. Remove the cover of the cartridge.
    1. Keep the side with the arrow mark face up.
    2. Remove the cover by sliding it in the direction indicated by the arrow.

    DisassembleCartrige

  3. Remove the used cleaning liquid pouch from the cartridge case.

    RemoveInkPouch

  4. Load a new cleaning liquid pouch in the cartridge case.
    MEMO

    Pass the protrusions on the cartridge case through the holes on the cleaning liquid pouch to load it in the correct position.


    InsCleaningPouch

  5. Attach the cover to the cartridge case.
    1. Insert the protrusions at the back of the cover (A) into the holes on the cartridge case.

      Hook_CoverINK

    2. Press down on the cover to fit the cover hooks into the holes on the cartridge case.
      There are six hooks. Check that all the hooks have been fit into the holes and that the cover does not come free from the cartridge case.

      Press_CoverINK

  6. Load the cleaning cartridge in the cleaning liquid slot.
    Orient the cartridge so its protrusion () is face up, and then, while keeping the cartridge level, insert the cartridge as far as it will go.

    CleaningLiqu

  7. Tap Yes when the cleaning liquid pouch replacement confirmation screen appears.

    If you tap Yes to reset the amount of cleaning liquid remaining, the cleaning liquid pouch will be identified as a new product.

    MEMO

    If you tap Yes on the cleaning liquid pouch replacement confirmation screen even though you have not replaced the cleaning liquid pouch, the amount of cleaning liquid remaining is reset. In this situation, no notification will appear even if the amount of cleaning liquid remaining is very small, and the message Replace the cleaning liquid pouch. will appear when the cleaning liquid runs out. To ensure you have enough time to prepare the replacement cleaning liquid, tap No if you have not replaced the cleaning liquid.