1. Clean the print head caps.

Procedure
  1. Remove any media.
  2. Tap VG3_Panel_Icon_CLEANING.
  3. Tap Manual Cleaning.
  4. Tap Execute.
    The print heads move to the left end of the machine.
  5. Follow the instructions on the operation panel to perform Manual Cleaning.
    • Tap VG3_Panel_Icon_LEFT_blue or VG3_Panel_Icon_RIGHT_blue to check the procedure.
    • If you complete the work without viewing the instructions, tap Finish All.
    IMPORTANT
    • Be sure to use one of the included cleaning sticks.
    • Do not use a previously used cleaning stick.
    • Do not put a previously used cleaning stick into the cleaning liquid.


    IMPORTANT

    Use a pair of tweezers to remove the pieces of hardened ink that are 3 mm (0.12 in.) or more in length.

    Do not use excessive force when pulling on pieces of hardened ink that are difficult to remove. Doing so may damage the print head caps.

    。


    When you have finished cleaning, close the right cover.