Specifications
| LG-640 | LG-540 | LG-300 | ||
|---|---|---|---|---|
| Printing method | Piezo ink-jet method | |||
| Media | Width | 335 to 1,625 mm (13.2 to 64 in.) | 295 to 1,371 mm (11.7 to 54 in.) | 182 to 762 mm (7.2 to 30 in.) |
| Thickness |
Max. 1.0 mm (39.3 mil) with liner, for printing Max. 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting |
|||
| Roll outer diameter | Max. 250 mm (9.8 in.) | |||
| Roll weight | Max. 45 kg (99 lb.) | Max. 35 kg (77 lb.) | Max. 30 kg (66 lb.) | |
| Core diameter | 76.2 mm (3 in.) or 50.8 mm (2 in.) | |||
| Printing/cutting width*1 | Max. 1,600 mm (62.9 in.) | Max. 1,346 mm (52.9 in.) | Max. 736 mm (28.9 in.) | |
| Ink | Type | ECO-UV (EUV5P) 750ml pouch | ||
| Colors |
Eight colors（Cyan, Magenta, Yellow, Black, Gloss, White, Orange, and Red） Seven colors（Cyan, Magenta, Yellow, Black, Gloss, White, and Red）and Primer Seven colors（Cyan, Magenta, Yellow, Black, White, Orange, and Red）and Primer Seven colors（Cyan, Magenta, Yellow, Black, White, Orange, and Red） Six colors（Cyan, Magenta, Yellow, Black, Gloss, and White）and Primer Six colors（Cyan, Magenta, Yellow, Black, Gloss, and White） Four colors（Cyan, Magenta, Yellow, and Black） |
|||
| Ink-curing unit | Built-in UV-LED lamps | |||
| Printing resolution (dots per inch) | Max. 1,200 dpi | |||
| Cutting speed | 10 to 300 mm/s (0.39 to 11.8 in./s) | |||
| Blade force*2 | 30 to 500 gf | |||
| Blade | Type | Roland CAMM-1 series blade | ||
| Offset | 0.000 to 1.500 mm (0.0 to 59 mil) | |||
| Software resolution (when cutting) | 0.025 mm/step (0.98 mil/step) | |||
| Media heating system*3 |
Front heater set temperature : 30 to 55 ℃ (86 to 131 °F) |
|||
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) | |||
| Power-saving function | Automatic sleep feature | |||
| Power requirements | 100-120/220-240 Va.c. 50/60 Hz 6.5/3.2 A | 100-120/220-240 Va.c. 50/60 Hz 5.7/2.6 A | ||
| Power consumption | During operation | Approx. 800 W | Approx. 650 W | |
| Sleep mode | Approx. 85 W | |||
| Acoustic noise level | During operation | 63 dB(A) or less | ||
| During standby | 58 dB(A) or less | |||
| Dimensions (Width x Depth x Height) | 2,902 mm × 748 mm × 1,412 mm (114.3 in. x 29.5 in. x 55.6 in.) | 2,648 mm × 748 mm × 1,412 mm (104.3 in. x 29.5 in. x 55.6 in.) |
2,038 mm × 748 mm × 1,412 mm (80.3 in. x 29.5 in. x 55.6 in.) |
|
| Weight | 209 kg (461 lb.) | 198 kg (437 lb.) | 168 kg (371 lb.) | |
| Environment | During operation*4 | Temperature : 20 to 32 ℃ (68 to 89.6 °F) , Humidity：35 to 80 % RH（no condensasion） | ||
| Not operating | Temperature : 5 to 40 ℃ (41 to 104 °F) , Humidity：20 to 80 % RH（no condensasion） | |||
| Included items | Dedicated stand, power cord, media take-up unit, media holders, separating knife, re-placement blade, cleaning liquid, drain bottle, User's Manual, software (VersaWorks,Roland DG Connect), etc. | |||
*1 The length of printing or cutting is subject to the limitations of the program.
*2
- 500 gf is the maximum instantaneous blade force.
- The blade force must be adjusted according to details such as the media thickness.
*3
- Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
- Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
