LEF2-300 and LEF2-300D

This document is the user's manual for both the LEF2-300 and the LEF2-300D (LEF2-300 + D-KIT). The D-KIT is an option that extends the height limit of the LEF2-300 to 200 mm (7.87 in.) and can be selected at the time that the LEF2-300 is purchased. The following notations are used to distinguish between the models where necessary.

Thickness of object to be printed on is 0 to 100 mm (0 to 3.94 in.): LEF2-300

Thickness of object to be printed on is 0 to 200 mm (0 to 7.87 in.): LEF2-300D

Most of the figures in this document depict the LEF2-300.