7. Limit the print heads used for printing.
Procedure
- Check for the nozzle group with dot drop-out or dot displacement by viewing the results of the printing test."1" or "2" is the nozzle group. The following shows a dot drop-out in nozzle group 2.MEMO:
If the printing-test results are difficult to interpret
Check the results in a bright location, changing your line of vision. They are visible using the reflection of the light.
- Start VersaWorks.
- Click Printer - Printer Settings. The Printer Settings dialog box appears.
- From the Printer List, select the printer whose print heads will be limited.
- Click Advanced. The Advanced dialog box appears.
- Select the print heads to use in printing from the printing-test results.
- Click OK.Close the Advanced dialog box.
- Click OK.
- Close the Printer Settings dialog box.
- The
icon is displayed on top of the image of the printer whose setting has been changed.