Light Choke Cleaning Method

If problems still remain even after circulating the ink, perform "light choke cleaning."

Light choke cleaning can be used to stabilize the output colors by agitating the ink.

IMPORTANT:

Light choke cleaning consumes a lot of ink, and overly frequent use may damage the print heads themselves. Avoid performing this operation more than necessary.

Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the screen shown below.


  3. Press [▶] once, and then press [▼] several times to display the screen shown below.


  4. Press [▶] once, and then press [▼] several times to display the screen shown below.


  5. Press [ENTER].
    The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the procedure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45 seconds")


    MEMO:
    When "ENPTY DRAIN BOTTLE" is displayed during cleaning


    1. Remove the drain bottle and discard the discharged fluid.

    2. Quickly attach the emptied drain bottle to the machine once more.

    3. Press [ENTER].



    IMPORTANT:

    When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to prevent this fluid from soiling your hands or the floor.

    CAUTION:

    When "ENPTY DRAIN BOTTLE" appears on the screen, be sure to discard the discharged fluid.

    Failing to discard the discharged fluid when "ENPTY DRAIN BOTTLE" is displayed will lead to the discharged fluid overflowing during cleaning.

    CAUTION:

    Before you detach the drain bottle, be sure to wait for the screen to display "ENPTY DRAIN BOTTLE". After discarding the discharged fluid, promptly attach the drain bottle to the machine.

    Failing to follow this procedure may cause discharged fluid to flow out of the tube and spill, soiling your hands or the floor.

    WARNING

    Never place discharged fluid or ink near an open flame.

    Doing so may cause fire.

    CAUTION:

    To store discharged fluid temporarily, place it in the included drain bottle or in a durable sealed container such as a metal can or polyethylene tank, and cap the container tightly.

    Any spillage or vapor leakage may cause fire, odor, or physical distress.

    IMPORTANT:

    Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.

    Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid or discard it with ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so may have an adverse impact on the environment.

    When cleaning finishes, the screen shown below appears again.


  6. Press [MENU] to go back to the original screen.
    If uneven color issues with white ink are not resolved by light choke cleaning, perform ink renewal.