The message shown below appears when a certain amount of discharged fluid has collected in the bottle and the sub power is turned on. If this message appears, dispose of the discharged fluid.
If you continue to use the drain bottle without discarding the discharged fluid even though the message above has been displayed, the drain bottle will become full, and the message shown below will be displayed. No more discharged fluid can be stored in the drain bottle, so be sure to discard the discharged fluid immediately. If this message appears during printing, printing is stopped.
IMPORTANT:
When the message "LIMIT OVER ENPTY DRAIN BOTTLE" appears on the screen, be sure to discard the discharged fluid.
If you do not discard the discharged fluid, you will not be able to clear this message.
Procedure
Remove the drain bottle and discard the discharged fluid.
IMPORTANT:
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise caution to prevent this fluid from soiling your hands or the floor.
Quickly attach the emptied drain bottle to the machine once more.
