3 Perform a printing test to check the results.

  1. Load the media.
    Setup of Media
  2. Press FUNCTION.
  3. Press ▼, then ▶ to display the screen shown below.


  4. Press ENTER.
    Printing of the test pattern starts.
  5. Check whether there is dot drop-out or dot displacement in the test pattern.
    Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.


  6. If you have opened the front cover, close it.
    If no dot drop-out or dot displacement occurs, this operation is finished. Press FUNCTION to go back to the original screen.
If dot drop-out or dot displacement is present, perform cleaning such as normal cleaning.