Cleaning the Cutting Carriage Roller

Paper dust affixes to the separating knife carriage roller during media separation. Periodically wipe the area clean.

WARNING

Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.

Doing so may cause fire.

CAUTION:

Before attempting cleaning, switch off the sub power and wait until the UV-LED device cools (approximately 15 minutes).

Sudden movement of the machine may cause injury, or hot components may cause burns.

IMPORTANT:

  • This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.

  • Never attempt to oil or lubricate the machine.



Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.